What’s going on in the shop?

1949 International KB-6 Truck
December, 2018

Now that Ryan is 16, we purchased this truck to do a complete restoration.  The idea is to tear the entire truck down to the frame and keep as much original as possible.  Ryan thinks we need to re-power the truck with a diesel.  I’m not opposed to that option, as I would like to allow for some slight retro-mod. 

Ryan and I got the old truck running and was able to move it around under it’s own power. However, even after tearing down the carburetor and making some temporary modification, the engine is in a serious need of a full rebuild. At a minimal, the head and valves clearly need refurbished. However, we found a diesel engine out of a 1980’s truck. We’re going to try and retro-fit the newer engine with minimal modifications.

We also removed the old flat bed. I was hoping to reuse this bed, but it was in pretty bad shape. We will build a new bed at a later time.

August 2019

Truck is in the shop and getting stripped down to the frame.

Dec 2019

We’re down to the frame

January 2020

We started body work on the cab. Needed to replace the corners with new sheet metal. Ryan is quite the welder.